1. Preparation. First, clean the floor to make sure there are no debris, oil stains, or standing water. Inspect the pad for breakage, dirt or oil stains and replace it if so. Draw lines on the ground to locate the area that needs to be protected.
2. Unfold and position the protective pad. Unfold the protective mat to make sure its size matches the size of the ground. Align the edges of the mat with the scribing of the ground to cover the entire area that needs to be protected.
3. Secure the protective pad. Use tape, nails, or other tools to secure the protective pad to the ground. Be careful not to damage the protective pad. If desired, the edges can be glued to the ground using tape or glue.
4. Repeat laying (if needed). If multiple layers of protective mats need to be laid, they should be repeated as required, ensuring that each layer of protective mats is firmly positioned and fixed.
In addition, if the floor is tiled, the protective pad may need to be cut to fit the shape and size of the floor. When cutting, proper tools should be used and safety should be taken into account.
Ground Mat installation quote details
- Project application and total area
- Mat size, thickness and surface pattern preference
- Ground condition, working condition and vehicle or equipment type
- Connection method, layout drawing or access route
- Quantity, destination and deadline
For a faster quote, send these details through the inquiry form or Contact Us page.
